Tutorial for a fancy fold card

This is the first time I have written a tutorial. I can teach face to face with no problems but struggle to put what I mean into writing!

The card I am making today is one of my favourite styles. It is simple to make once you get the measurements right so here goes:

 

you need 3 pieces of card stock cut to the following sizes:

Layer 1 6x7 inch

Layer 2 6x6 inches

Front of card 7.5 x 3 and 15/16 of an inch

 

You will also need 4 different backing papers - I have used Scribble and Scrap's Fabulous florals 2 for my sample. and a topper for the front of the card I have used one of the images from vintage photo sheet 19 for mine.

 

Taking Layer 1 you need to score 1.5  inches in on either side of the 7 inch length

Layer 2 needs scoring at 1 inch on opposite sides.

 

You then need to punch along the edges like so:

 

 

You then add strips of backing paper to the punched edges - the width of these will be dependant on the punch you use. Mine are 1 inch and 1/2 inch

 

With the Front piece of card score this at 6 and 6 and 1 eighth and fold. Then add backing paper to the inside long part and double sided tape to the shorter end:

 

your pieces should then look like this:

 

 

Line the shorter edge of the front piece with the outer top edge of layer 2 this is then stuck to the back of layer 2

 

Turn the card over and the inner of your card should look like this:

 

 

As you can see I have added a sentiment!

 

Fold the front flap down over the top of layer 1

 

Then take Layer 1 and glue this to the inner layer of layer 2 with the decorated edges facing you. This will cover the flap of the card front making the back of your finished card look neater

 

All that is left to do then is decorate the front of the card with your choice of papers and topper.

 

 

By folding the  layer 1 punched sides out and layer 2 in the card will stand independently.